# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
	RgbPath      "/usr/share/X11/rgb"


# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)

    # For XFS, uncomment this and comment the others
    # FontPath	"unix/:-1"
    FontPath    "/usr/share/fonts/local/"
    FontPath    "/usr/share/fonts/misc/"
    FontPath    "/usr/share/fonts/Type1/"
    FontPath    "/usr/share/fonts/TTF/"
    FontPath    "/usr/share/fonts/artwiz/"
    FontPath    "/usr/share/fonts/ttf-bitstream-vera/"
    FontPath    "/usr/share/fonts/corefonts/"
    FontPath    "/usr/share/fonts/cyrillic/"
    FontPath    "/usr/share/fonts/freefont/"
    FontPath    "/usr/share/fonts/lfpfonts-fix/"
    FontPath    "/usr/share/fonts/lfpfonts-var/"
    FontPath    "/usr/share/fonts/tengwar-fonts/"
    FontPath    "/usr/share/fonts/terminus/"
    FontPath    "/usr/share/fonts/urw-fonts/"
    FontPath    "/usr/share/fonts/75dpi/:unscaled"
    FontPath    "/usr/share/fonts/100dpi/:unscaled"
    FontPath    "/usr/share/fonts/75dpi/"
    FontPath    "/usr/share/fonts/100dpi/"
    FontPath    "/files/mirror/TrueType"


# The default path is shown here.


EndSection

# **********************************************************************
# Module section -- this is an optional section which is used to specify
# which run-time loadable modules to load when the X server starts up.
# **********************************************************************

Section "Module"
    Load  "extmod"
    Load  "dbe"
    Load  "record"
    Load  "xtrap"
    Load  "dri"
    Load  "glx"

# This loads the Type1 and FreeType font modules

    Load	"type1"
    Load	"freetype"

EndSection


# **********************************************************************
# Server flags section.  This contains various server-wide Options.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is 
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option	"NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option	"DontVTSwitch"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option	"DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option	"DontZoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option	"DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option	"AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option	"DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option	"AllowNonLocalModInDev"

# Set the basic blanking screen saver timeout.

    Option	"blank time"	"10"	# 10 minutes

# Set the DPMS timeouts.  These are set here because they are global
# rather than screen-specific.  These settings alone don't enable DPMS.
# It is enabled per-screen (or per-monitor), and even then only when
# the driver supports it.

    Option	"standby time"	"20"
    Option	"suspend time"	"30"
    Option	"off time"	"60"

# On some platform the server needs to estimate the sizes of PCI
# memory and pio ranges. This is done by assuming that PCI ranges
# don't overlap. Some broken BIOSes tend to set ranges of inactive
# devices wrong. Here one can adjust how aggressive the assumptions
# should be. Default is 0.

# Option   "EstimateSizesAggresively" "0"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier	"Keyboard1"
    Driver	"kbd"

# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris), comment
# out the above line, and uncomment the following line.

#    Option	"Protocol"	"Xqueue"

# Set the keyboard auto repeat parameters.  Not all platforms implement
# this.

    Option	"AutoRepeat"	"500 30"

# Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)).

#    Option	"Xleds"	"1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    Option	"XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a European
# keyboard, you will probably want to use one of:
#
#    Option	"XkbModel"	"pc102"
#    Option	"XkbModel"	"pc105"
#
# If you have a Microsoft Natural keyboard, you can use:
#
#    Option	"XkbModel"	"microsoft"
#
# If you have a US "windows" keyboard you will want:
#
#    Option	"XkbModel"	"pc104"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#
#    Option	"XkbLayout"	"de"
#
# or:
#
#    Option	"XkbLayout"	"de"
#    Option	"XkbVariant"	"nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#
#    Option	"XkbOptions"	"ctrl:swapcaps"


# These are the default XKB settings for xorg
#

#    Option	"XkbModel"	"pc101"
#    Option	"XkbLayout"	"us"
#    Option	"XkbVariant"	""
#    Option	"XkbOptions"	""

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"
    Identifier	"Mouse1"
    Driver	"mouse"

# The mouse protocol and device.  The device is normally set to /dev/mouse,
# which is usually a symbolic link to the real device.

    #Option	"Protocol"	"auto"
    Option	"Protocol"	"ImPS/2"
    Option	"Device"	"/dev/input/mice"
    Option	    "ZAxisMapping" "4 5 6 7"
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
	#DisplaySize	  300   180	# mm
    	Identifier	"LCD"
	VendorName   "IBM"
	ModelName    "2375"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.

	HorizSync 31.5-90

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.

	VertRefresh 50-90

# If a monitor has DPMS support, that can be indicated here.  This will
# enable DPMS when the monitor is used with drivers that support it.

#    Option	"dpms"

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

Section "Device"

# The Identifier must be present.

    Identifier	"Generic VGA"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver	"vga"

EndSection

Section "Device"
    	Identifier	"VideoCard0"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "ColorKey"           	# <i>
        #Option     "CacheLines"         	# <i>
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "DRI"                	# [<bool>]
	Option  "NoAccel" "false"
	Option	"DRI" "true"
        #Option     "NoDDC"              	# [<bool>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "XvMCSurfaces"       	# <i>
        #Option     "PageFlip"           	# [<bool>]

	Driver      "i810"
	VendorName  "Intel Corporation"
	BoardName   "Mobile 915GM/GMS/910GML Express Graphics Controller"
	BusID       "PCI:0:2:0"
EndSection

Section "Device"
    Identifier	"VesaCard"
    Driver	"vesa"
EndSection

# **********************************************************************
# Screen sections.
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.

Section "Screen"

# The Identifier, Device and Monitor lines must be present

    Identifier	"Screen 1"
    Device	"VideoCard0"
    #Device	"VesaCard"
    Monitor	"LCD"

# The favoured Depth and/or Bpp may be specified here

    DefaultDepth 24

    SubSection "Display"
        Depth		8
        Modes		"1280x768" "1024x768" "800x600" "640x480"
        ViewPort	0 0
    EndSubsection
    SubSection "Display"
        Depth		16
        Modes		"1280x768" "1024x768" "800x600" "640x480"
        ViewPort	0 0
    EndSubsection
    SubSection "Display"
        Depth		24
        Modes		"1280x768" "1024x768" "800x600" "640x480"
        ViewPort	0 0
    EndSubsection


EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present

    Identifier	"simple layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen	"Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".  In this example, "Mouse1" is the core pointer,
# and "Mouse2" is an extended input device that also generates core
# pointer events (i.e., both mice will move the standard pointer).

    InputDevice	"Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"
Mode 0666
EndSection
